Dorman OE Solutions 615-178 Intake Manifold




Regular Price: $362.99 | Price with discount: $180.35 | You Save: $182.64 (50%)
Got a Question for me?

Powered by Aol.com
 

Product Details

  • Re-engineered by Dorman with heat-resistant molding to reduce both warping and coolant leaks
  • Features a reinforced aluminum coolant crossover to eliminate corrosion and vibration
  • Torque specifications & bolt tightening sequence are provided for easier installation (where applicable)
  • Includes integrated gasket design





Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly.
Thank you for shopping with us!


Not what you're looking for? Try smart custom search:


Customer Review


Fixed a headache
My 97 T-Bird had a very bad coolant leak and I had to add water every day to keep it from over heating, the leak was not at the typical area for these manifolds, it was at the heater hose return, it had cracked down the peace of plastic that the hose clamps onto.By the way the manifold I replaced was not the original it had already been replaced from the warranty one time before.I think Ford should have to replace these throughout the life of the vehicle.The unit I purchased from Amazon was a perfect fit, it went in without a hitch and has cured my leaking problem.This is a quality part from a quality source.I searched everywhere and Amazon was the best place to purchase this item from, I even have a friend who works for a company that gets these manifolds at wholesale and Amazon still beats their price.If you need one of these buy it here you want be sorry...
Top to learn more






Product Description

More like a complete service kit than a single part. Dorman’s Intake Manifold includes all the essential components for a full repair. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience. Top to learn more



GREAT BUY FOR FORD/LINCOLN/MERCURY OWNERS
I bought this for my 96 Lincoln after I found out that my intake manifold cracked and it was past the deadline for the class action settlement from Ford. There are great instructions on the internet for the installation and it took about 7 hours from start to finish. The only problem was that one of the two temperature sensors would not come out of the old manifold and had to be replaced. The most difficult part of the installation was cleaning the mating surfaces. So far everything has worked fine.
Top to learn more







Edelbrock 7220 Intake Manifold Gasket




Regular Price: $18.95 | Price with discount: $14.95 | You Save: $4.00 (21%)
Got a Question for me?

Powered by Aol.com
 

Product Details

  • Sold as a pair
  • Edelbrock recommends the use of a silicone sealant in place of end seals
  • Silicone bead around each port opening ensures a perfect seal
  • Does not include end seals
  • Has a port height of 2.000 and port width of 1.200 with a thickness of 0.060





Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly.
Thank you for shopping with us!



Product Description

The Edelbrock Intake Manifold Gaskets are the perfect companion for the Edelbrock intake manifolds and cylinder heads. They feature an exact port match for maximum flow and performance. A perfect seal is assured because all of the Edelbrock gaskets have a silicone bead around each port opening. It has a port height and port width of 2.000 and 1.200 respectively with a thickness of 0.060. An intake manifold is a system of passages which conduct the fuel mixture from the carburetor to the intake valves of the engine. The gaskets provide optimum sealing in intermittent operating temperatures up to 400 degrees Fahrenheit. The gasket maintains a perfect seal under pressure and temperature changes. Top to learn more




Holley 108-80 SysteMAX Intake Manifold Gasket




Price with discount: $23.90 |
Got a Question for me?

Powered by Aol.com
 

Product Details

  • Does not include hardware
  • Increases air flow
  • Fully machined
  • Bolts on the engine
  • 90-day limited warranty





Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly.
Thank you for shopping with us!


Customer Review


Great gasket.
This is the exact gasket Holley sales for their Systemax II upper intake. I believe it's called a bi-metal gasket.
Top to learn more





It's a Holley!
Stock Holley Systemax upper intake gasket for five liter Ford Mustangs. They are not easy to find and can be pricey when you do find them. The price I paid at Amazon with shipping was less than the price of this gasket without shipping at several other places.
Top to learn more






Product Description

The Holley SysteMAX intake manifold kormetal gasket is to be used between the upper and lower manifolds. Top to learn more




Mr. Gasket 208G Intake Gasket




Regular Price: $25.89 | Price with discount: $16.82 | You Save: $9.07 (35%)
Got a Question for me?

Powered by Aol.com
 

Product Details

  • Includes necessary seals as well as block-off plates
  • Provides long lasting durability
  • Facilitates long-lasting durability
  • Constructed from a blend of nitrile rubber as well as fiber
  • Designed to ensure excellent sealing





Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly.
Thank you for shopping with us!



Product Description

Mr. Gasket Intake Gaskets are designed to provide excellent sealing. They are made from a high quality material which renders extreme durability. These gaskets could be trimmed for modifying the port and are durable to meet the sealing demand of all engines. They are easy to install and are corrosion resistant. Top to learn more




Mr. Gasket 5834 Stock Ultra-Seal Intake Manifold Gasket Set




Regular Price: $31.29 | Price with discount: $20.28 | You Save: $11.01 (35%)
Got a Question for me?

Powered by Aol.com
 

Product Details

  • Port dimensions measure 2.11" high by 1.25" wide
  • Cellulose and nitrile provide sealing and durability
  • Designed for stock ports
  • Silicone beading applied around each port creates a tight-leak proof seal
  • Resists wicking and can withstand 600-degree heat





Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly.
Thank you for shopping with us!



Product Description

This stock ultra-seal intake manifold gasket set is made of a cellulose and nitrile material that is less compressible with a 2.11" port height and 1.25" port width with a thickness of 1/16". This material has an anti-stick coating, plus a silicone bead around each intake port except where noted for a tight, leak-proof seal. These gaskets are a great solution for intake-sealing problems associated with the small sealing areas between ports. This set comes complete with all necessary seals, can be trimmed to fit modified ports, fits aluminum heads and manifolds, and has an open type of water crossover style. Top to learn more




Mr. Gasket 5835 Ultra Seal Intake Gasket



Regular Price: $31.29 |
Got a Question for me?

Powered by Aol.com
 

Product Details

  • Provides excellent sealing and durability
  • Perfect for aluminum heads and manifolds
  • Manufactured from cellulose / nitrate composition gasket material
  • Comes complete with manifold end rail seals and distributor gasket
  • Cam be trimmed for modified ports





Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly.
Thank you for shopping with us!



Product Description

Mr. Gasket Ultra Seal Silicone Beaded Gasket is perfect for aluminum heads and manifolds. It is made from a blend of cellulose and nitrile material which is less compressible. The height of this gasket is 2.11" and its width is 1.25". This composition enhances excellent sealing and durability. Silicone beading is applied around each intake port to generate a tight leak-proof seal. The thickness of this gasket is 0.060". The ultra-seal intake gasket provides the perfect solution for intake-sealing problems associated with the small sealing areas between ports and the different expansion rates of intake manifolds and cylinder heads. This intake gaskets can be trimmed to fit modified ports. Top to learn more



BUY Mr. Gasket 5835 Ultra Seal Intake Gasket



Lincoln Intake Gasket


(You said) I looked at three different places and thay all had the same gasket. (You asked) How do I find out what gasket I need. Buy the New and UPGRADED gaskets that the:.

The valve has a rubber gasket on the flapper. Disconnect the ps pressure line, take the belt off the ps. Pull the ps pump toward the passenger side and tie it off. This way sure beats pulling off the fuel rails, intake, which usually cracks taking it off, throttle body, and everything else. That "flapper" will come out without taking off the intake. All information on this site is the opinion of its members and not the opinion of the site itself. com is not affiliated in any way with the General Motors Corporation, Cadillac or any other company listed herein. com recognizes that "Cadillac", it's logos and various model names and numbers are registered trademarks of the General Motors Corporation.



SHOP FOX M1015 6-Inch by 10-Inch Micro Lathe
RCi 2151AS Aluminum Fuel Cell With Sending Unit, Natural Aluminum Color, 15 Gallon, 18L x 20W x 10H

Engine: Lincoln Oil Pan | Lincoln Oil Pump | Lincoln Piston | Lincoln Ring | Lincoln Rod | Lincoln Rocker Arm | Lincoln Valve Cover | Lincoln Valve | Lincoln Air Filter | Lincoln Fuel Filter | Lincoln Oil Filter | Lincoln Transmission Filter | Lincoln Valve Cover Gasket | Lincoln Exhaust Gasket | Lincoln Full Set Gasket | Lincoln Intake Gasket | Lincoln Oil Pan Gasket | Lincoln | Oil |